תמחש - מחירון 2021

173 2021 מחירון מפרטים ותעודות ArcelorMittal Europe – Flat Products Electrical equipment is often at risk of oxidation due to the aggressive outdoor and indoor environments. This can be due to condensation in industrial or agricultural buildings, local conditions, the building’s location (marine or tropical) or climate. These factors can impact the structural integrity of electrical equipment, electrical safety, aesthetics, and the overall durability and lifetime of the system. Magnelis® is an effective answer to all of these challenges. Oil or E-passivation® Oil or E-passivation® Magnelis® coating layer Magnelis® coating layer Steel substrate Magnelis® is an exceptional coating which provides breakthrough protection against corrosion for electrical equipment in many types of buildings including industrial, agricultural, commercial, data centres, hospitals, marine structures, warehouses, waste treatment centres, swimming pools and sports centres. Magnelis® can be delivered according to EN 10346. It has similar electrical conductivity to galvanised steels and allows direct earthing contact. Magnelis® can be post-painted with similar painting processes to those used for galvanised steels. Magnelis® is produced on a continuous hot dip galvanising line. The molten bath has a unique zinc-based chemical composition, wich includes 3.5% aluminium and 3% magnesium. Thanks to its composition, Magnelis® provides an unprecedented level of surface and cut-edge protection, even in the most hostile environments. Magnelis® for electrical equipment High-level protection against corrosion The coating for high strength steels Magnelis® can be applied to a full range of high strength steels (HSS) with a yield strength of up to 700 MPa. HSS allow designers to create light and cost-effective structures. ArcelorMittal’s HyPer® range of HSS is fully compliant with Eurocode requirements and enables structural design to be optimised. ArcelorMittal has developed several tools to demonstrate the technical and cost-effective benefits of HSS for various load cases and configurations. Do not hesitate to contact us for more information. The best alternative to post galvanisation • Cost reduction (zinc, transport, manpower) • Simplified logistics and time saving • Better geometric tolerance for final parts (especially thin gauges) as there is no deformation of the steel during the coating process • Lower environmental impact • Smooth surface Protected by Magnelis® 3% 3.5%